This week we worked on redesigning a very old breakout board, the I2C/SPI LCD Backpack: https://www.adafruit.com/product/292 . We're going to add plug-n-play STEMMA QT ports and since we're doing a bit of work, why not fix up a bunch of other things that have been annoying to us? For example, the trim pot is inexpensive and reliable but a bit annoying to turn unless you have just the right screwdriver. Let's look for an alternative that's easier for folks to adjust!
See the chosen part on Digi-Key https://www.digikey.com/short/pb4h254r
Visit the Adafruit shop online - http://www.adafruit.com
-----------------------------------------
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------
#adafruit #thegreatsearch #digikey @Digi-Key
See the chosen part on Digi-Key https://www.digikey.com/short/pb4h254r
Visit the Adafruit shop online - http://www.adafruit.com
-----------------------------------------
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------
#adafruit #thegreatsearch #digikey @Digi-Key
Activity