In this short podcast episode, Bryan talks about when to switch to emergency heat. He talks about coefficient of performance (COP) and how it's a deciding factor when to run emergency heat, which is when a system ONLY runs the backup heat; it doesn't use it as supplementary heat. When we have a heat pump with backup electric heat, we shouldn't ever rely just on emergency heat; we want the heat pump to run. Electric heat is just designed to supplement the heat pump's heating because it's inefficient. Hybrid or dual-fuel systems can use gas or hydronic fuel-based heat, and they work well on their own (such as if the heat pump is broken). You can't usually run the fuel-based emergency heat at the same time as your heat pump, so it makes sense to run just the emergency heat if it is fuel-based. The thermal balance point is the point at which the heat pump can no longer keep up with the heating load by itself; the temperature in the space will start to drop, but the heat pump will still produce heat. The thermal balance point can give us a clue about client comfort, not efficiency. COP is a measure of efficiency, and an electric heater has a COP of 1. A heat pump with a COP above 1 saves energy (compared to using just electric heat). COP is the heat delivered in BTUs divided by the energy supplied; it's a ratio. You can read the "Good COP - Bad COP" tech tip at https://hvacrschool.com/good-cop-bad-cop/. Learn more about the 5th Annual HVACR Training Symposium at https://hvacrschool.com/Symposium24. If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE." Subscribe to our YouTube channel at https://www.youtube.com/@HVACS. Check out our handy calculators HERE or on the HVAC School Mobile App (Google Play Store or App Store).